Husqvarna Front mowers are equipped with a front-mounted and low profile cutting deck. It will provide you with an excellent overview of the working area, enabling precise, close-up trimming. It also gives you unbeatable accessibility in under fences, bushes, park benches etc.
Be sharp at all times and find the right cutting deck for your Rider. A Combi deck that combines BioClip® cutting and rear ejection in the same deck.
Husqvarna Combi Decks combine very efficient BioClip® mulching with rear discharge. The heavyduty design is stamped from one piece of 4.5 mm steel, which contributes to its high efficiency, thanks to the optimized airflow. All decks are equipped with replaceable side skid wears.
Husqvarna Combi Decks combine very efficient BioClip® mulching with rear discharge. The heavyduty design is stamped from one piece of 4.5 mm steel, which contributes to its high efficiency, thanks to the optimized airflow. All decks are equipped with replaceable side skid wears.
Our Combi Cutting Decks offer two cutting methods: BioClip® and rear ejection. As the deck is stamped from a single piece of metal, with no seams and sharp bends to trap cuttings, the result is market-leading mulching and super-efficient ejection.
Our Combi Cutting Decks offer two cutting methods: BioClip® and rear ejection. As the deck is stamped from a single piece of metal, with no seams and sharp bends to trap cuttings, the result is market-leading mulching and super-efficient ejection.
Make sure to always use your ride-on mower at its full potential. Husqvarna has a comprehensive range of front-mounted attachments for all kinds of purposes, such as brushing, snow removal and flail mowing.
Highly productive flail mower for rough area clearing. PTO driven with reinforced bevel gear. Featuring patented shark fin shredder for improved mulching and performance in dense vegetation. Increased height adjustment range. Requires counterweight. Working width 120cm.
A rotating broom for sweeping leaves, gravel etc. Shaft driven with bevel gear and chain drive. Two rear solid support wheels. Requires hydraulic kit. Suits P525D.
High capacity blower for cleaning areas from leaves and litter. Shaft driven fan. Air outlet rotates 360 degrees and is controlled from driver's seat. Requires hydraulic kit. Suits P525D
Rotating broom for sweeping up gravel and leaves. Can be angled to either side. The broom includes a spray guard. Working width 120cm. Suits P524.
Robust, reliable flail mower for rough area clearing of overgrown grass and low brushwood. Working width 100cm.
Practical utility bucket in welded high-tensile steel for maximum durability. Hydraulic adjustment of angling and emptying. Requires hydraulic kit 966 75 45-01. Must be used with counterweight. Suits P525D.
With Husqvarna’s rear-mounted attachments, including collectors, trailers, counter weights, moss rakes, aerators and spreaders, you can easily adapt your Rider to the season and situation.
Rear counterweight for improved grip and stability. Must be used when operating frontmounted attachments. Total weight 67kg. Includes 5 x 10kg stackable, separate weights to be installed to a mounting frame (12kg). The weights are locked with a rod and bolts. Suits P525D
Trailer hook to be fitted to front mower P 525D. Fits to the existing holes in the die cast rear chassis_ hole diameter 16 mm, c-c distance 89 mm. Ball diameter 50 mm. Maximum tow weight 350 kg.
For safe transportat on public roads and to and from work sites. Kit includes Control Box (966 79 08-01), Lighting Kit - Rotating Beacon (966 79 15-01), Position & Turning Lights (966 79 09-01 & 966 79 10-01) and Number Plate Kit (966 79 13-01).
Kit necessary for adaption of front-mounted attachments with hydraulic function. Includes two auxiliary hydraulic connections, valve, switch and hoses with connectors and wires. Suits P525D
Rear position and turning lights to be mounted on ROPS bar. Adjustable position to enable folding of ROPS bar and narrow manoeuvring. Requires control box (966 79 08-01). Suits P525D - Included in Road Kit (585 31 87-01)
Orange rotating flashing light. To be installed to the ROPS bar. Post, wires and switch included. Suits P525D - Included in Road Kit (585 31 87-01)
To connect and control each function of the road kit. Mounts to steering column. Mandatory for front headlights, position and turning lights, number plate kit and cabin road kit. Suits P525D - Included in Road Kit (585 31 87-01)
Front position and turning lights. Mounts to rear position and turning lights kit (966 79 09-01). Requires control box (966 79 08-01). Suits P525D - Included in Road Kit (585 31 87-01)
To be installed to rear position and turning lights kit. Includes number plate lightning. Suits P525D - Included in Road Kit (585 31 87-01)
The Lithium XS battery charger is an advanced microprocessor controlled charger and maintainer. With up to 5A of charge current available, it can charge batteries from 5Ah to 60Ah and maintain up to 120Ah. An easy to use charger with 8 charging steps, a testing sequence that tells you if the battery can take and retain the charge, a unique maximisation step to restore full capacity and patented maintenance charging for maximum performance.
For all 12V lead-acid batteries from 1.2-32Ah. The charger is suitable for maintenance charging up to 100Ah. Perfect for seasonal vehicles. Fully automatic for optimal charging and maintenance charging that maximises battery life and performance. Reverse-polarity protected and water-resistant (IP 65) for outdoor use. Ideal for use with Battery status indicator.
A practical quick connector for those with batteries that are difficult to access or are hidden. The eyelet terminals are fitted to the battery, giving effortless connection without the need of actually reaching the battery. Fits Husqvarna's Battery charger XS 800 (new connection) and BC 0.8.
Your body is your most important tool. We offer a wide range of protective products such as footwear, glasses, gloves and hearing protection.
This new hearing protection with FM radio has a new headband that centralises the pressure on the headband, giving less pressure on the ears. It has improved attenuation and improved sound quality. The ear muffs are individually designed for the left and right ear, meaning that they follow the shape of the head. This gives a perfect fit for all ears. Has Audio input 3.5mm (AUX) for mp3 or communication radio. Noise reduction - SNR - 27dB(A). Meets requirements of EN352-3:2002, EN352-6:2002 and EN352-8:2008.
Disposable foam ear plugs in a tapered shape for comfort. Convenient pack size of 25 pairs. 32dB(A) NRR
This new hearing protection with FM radio has a new headband that centralises the pressure on the headband, giving less pressure on the ears. It has improved attenuation and improved sound quality. The ear muffs are individually designed for the left and right ear, meaning that they follow the shape of the head. This gives a perfect fit for all ears. Has Audio input 3.5mm (AUX) for mp3 or communication radio. Noise reduction - SNR - 27dB(A). Meets requirements of EN352-3:2002, EN352-6:2002 and EN352-8:2008.
Disposable foam ear plugs in a tapered shape for comfort. Convenient pack size of 25 pairs. 32dB(A) NRR
